How To Lower Spare Tire On Silverado Without Tool

If you drive on a long stretch of road, one of the car tires can become damaged or burst. The driver must first know how to be able to get a spare tire down before replacing it. However, you do not have a specific method to get it down in certain situations.

So, without the tool, how can you get the spare tire down? If you can’t get the spare tire down or even get it down incorrectly, you risk causing damage. These are almost as horrible as not having a spare tire.

Here is how to remove the tire on Silverado without tools

The fact that you’re going to lower your spare tire without a “tool” doesn’t mean you’ll do it with your bare hands. It would be detrimental to do so. To make up for the lack of the key, you’ll need some supplies. Here’s all you’ll need.

Invest in a jack kit (without jack). You can get one at a hardware store or even on Amazon. The ignition key is the next thing on your shopping list. The ignition key, along with the other components of the Jack package, will release the tire’s attachment to the wheel.

Chevrolet Trucks are known for their dependability, making them a favorite among those who enjoy transporting stuff. It’s helpful to have some pointers on how to get the spare tire down:

Step 1

To get your spare tire down, you’ll need some equipment. It’s a good idea to start with the ignition key as well as a jack kit without the jack. If you’re not sure what a jack kit really is, look under your back bench seat for a long pouch.

A crowbar, as well as several rods, are included. If you don’t have the package, you can get them from a variety of sources.

Step 2

The directions are simple to follow. Begin by getting into the back of your truck. Check for the presence of a spare tire when doing so. It’s easy to do, and all you have to do is get down on a knee and look behind the vehicle’s bumper. You should be able to see tire grooves if you touch the nose against the monitor.

Step 3

Now, you can stand once you’ve acknowledged that you do have a tire. Move ahead to the passenger section of the license plate and look for a key opening behind a plastic cover. Now, in this space, turn to the right while tugging a little towards you, using the ignition key.

The lock will separate from the hole when you do this. The assembly can now be placed in the back of the vehicle. To get the rods as well as the crowbar, first, open the kit. One of these rods should be wider at one end than the others.

Step 4

It should also be flared out on all sections. Set aside this female rod as well as attach it to another rod. This attachment will allow you to access the male side of the bumper with ease.

Link the male and female sections and rotate the bar in an anti-clockwise direction. The spare tire should begin to descend and fall to the ground. Carry on until the tire hits the ground, then continue. That’s all there is to it; you can now change your flat tire.

Final Note

No one wants a vehicle to spray or a tire to explode unexpectedly while you are driving on the road. Preparing the requisite skills, as well as the concept of changing tires, can, however, assist you in the most efficient and healthy manner.

It’s not easy to lower the spare tire without using a tool. You’ll need to put in a lot of work, and the whole method will take you about an hour if you’re a beginner. However, it is preferable to the alternative, that is, to wait for several hours on the side of the road for assistance. As a result, you should be informed of how to complete this task.

Leave a Comment